[LAU] SooperLooper OSC control

From: Salvatore Di Pietro <salvuz_78@email-addr-hidden>
Date: Fri Apr 13 2007 - 15:50:49 EEST

Hi all,

I'm trying to control sooperlooper (1.0.8c) via OSC commands (all on the
same host), using the commandline utility sendOSC, found at
http://www.cnmat.berkeley.edu/OpenSoundControl/clients/sendOSC.html .
To (try to) listen to incoming messages from the sooperlooper OSC server
I use dumpOSC
http://www.cnmat.berkeley.edu/OpenSoundControl/dumpOSC.html

But the sooperlooper OSC server doesn't seem to react to any other
command except /quit, (which makes it quit and after a while slgui pops
out a dialog saying "Lost connection with the SL engine")

On the sooperlooper-users ml (on which I am not subscribed) archives I
found a thread on (almost) the same problem (sooperlooper OSC server not
reacting to get requests or ping):
http://sourceforge.net/mailarchive/forum.php?thread_name=20070120174611.ke2w9u695w4wkw8o%40webmail.121234.net&forum_name=sooperlooper-users
Jesse Chappel gave an example for ping command, but it doesn't work here..

According to http://essej.net/sooperlooper/doc_osc.html , the command
for i.e. starting to record on sooperlooper via OSC is
/sl/#/down s:cmdname
where # is the loop index (usually 0, or -1 to send the command to all
loops) and cmdname is a string, i.e record. It should issue the pressing
of "record" button.

So, with JACK running, and all from the same host:
  I fire up sooperlooper (that listens from OSC commands on port 9951 by
default) and from another terminal slgui, to "see" what happens in the
engine;
  From another one I start dumpOSC on port 11122;
  From another one I send commands to sooperlooper with sendOSC:

If I do
sendOSC -h 127.0.0.1 9951 /quit

sooperlooper quits.

If I do
  ./sendOSC -h 127.0.0.1 9951 /sl/0/down record
it doesn't start to record. The same with "down" and "up" instead of
"hit" (to issue pressing and depressing of the record key)

Neither it responds (dumpOSC doesn't print anything) to
  ./sendOSC -h 127.0.0.1 9951 /ping osc.udp://127.0.0.1:11122 /iamhere
I think it should print iamhere...

I have tried to load a loop with
./sendOSC -h 127.0.0.1 9951 /sl/0/load_loop /home/salvuz/loop.wav
osc.udp://127.0.0.1:11122 /sorry_ERROR

It neither loads the loop, nor sends the string sorry_ERROR to dumpOSC.

Does anyone know what am I doing wrong?

-- 
           salvuz
      POST FATA RESVRGO
  Linux registered user #291700 | machine #174619
  get counted on ---> http://counter.li.org/ <---
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Fri Apr 13 16:15:03 2007

This archive was generated by hypermail 2.1.8 : Fri Apr 13 2007 - 16:15:04 EEST