Re: [LAU] MIDI connections (BCF2000 <--> ardour)

Kevin Cosgrove wrote:
> On 24 May 2007 at 12:25, Kevin Cosgrove <kevinc@email-addr-hidden> wrote:
>
>> On 24 May 2007 at 12:15, Kevin Cosgrove <kevinc@email-addr-hidden> wrote:
>>
>>> On 24 May 2007 at 18:07, "Clemens Ladisch" <cladisch@email-addr-hidden> wrote:
>>>> Kevin Cosgrove wrote:
>>>>>> You need to connect one of these two:
>>>>>> BCF2000:BCF2000 MIDI 1
>>>>>> BCF2000:BCF2000 MIDI 2
>>>>>> to this:
>>>>>> ardour::mcu
>>>>> Well, I tried every combination of inputs and outputs I could
>>>>> think of, but it didn't work.
>>>> Try "aseqdump -p BCF2000:0" to see whether any data arrives.
>>>> If it does, there is some problem with the connection to ardour.
>>> I just tried that, and I get
>>>
>>> Waiting for data. Press Ctrl+C to end.
>>> Source_ Event_________________ Ch _Data__
>>> 28:0 Note on 0 108 127
>>> 28:0 Pitch bend 4 -8032
>>> 28:0 Note on 0 107 127
>>> 28:0 Pitch bend 3 -8016
>> [snip]
>>> etc.
>> I just thought about this a little bit more. My original
>> problem is not that data won't come out of the BCF2000. It
>> works fine with ardour when ardour addresses the hardware as
>> device="/dev/snd/midiC3D0". But, when ardour relies on a MIDI
>> patchbay to connect the ardour:mcu MIDI port to a port on the
>> BCF2000, then the connection isn't made. At this point my
>> supposition for testing is that ardour listens fine and the
>> BCF2000 talks fine, but a connection between the two isn't being
>> made.
>>
>> I'd like help debugging the connection issue, or confirming that
>> it's not a connection issue.
>
> I tried ardour 2.0.2 again with "28:BCF2000"'s "0:BCF2000 MIDI 1"
> output connected to "129:ardour"'s "1:mcu" input and this time I
> get one line of input traced:
>
> mcu input: Channel 3 Pitch Bend 6147
>
> At that point things seem to hang. If I try to quit ardour I
> get the dialog about saving first or just quitting. But, after
> selecting to just quit ardour doesn't quit, and I have to ctrl-c.
> Again, communication seems to be hung somewhere, but where?
>
I experienced similar issues with my BCF2000 in mcu mode. I didn't (and
don't) have the time to do a decent bug report though.

What I remember is that connecting the bcf to arours mcu port caused
ardour UI to freeze for a while. The audio keeps on playing though.
Ardour's response to the BCF was rather unpredictable (sometimes the
faders worked, sometimes they didn't), although everything comes in fine
at aseqdump.

My 2 cents,

Pieter

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Fri May 25 20:15:02 2007