Yes, it is possible to make 2 or more partitions on each disk and
configure each pair (hda1-hdb1, etc) with a different raid; however I
think the boot partition needs to be raid1.
It's really an easy task with id done with debian-installer; I cannot
say what the multimedia performance is, since I used it for GIS only.
But I can say that write/read performance on raid0 was really big, and
there were no disks fails on 3 years of use (well, disks were new at the
time)
Regards,
Roman
> Mark Knecht wrote:
> I believe it's even possible to make 2 partitions on each drive, and
> configure a raid-0 array with the first set and a raid-1 array with
> the second set. I haven't tried this out for performance-testing, but
> it should work. If you make the raid-0 big enough for typical
> recording, you can move the data to the raid-1 after your done.
>
> Regards,
> Hein Zelle
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Tue Jun 26 16:15:02 2007
This archive was generated by hypermail 2.1.8 : Tue Jun 26 2007 - 16:15:02 EEST