Ok, I got it to build (I was missing gcc-c++). I ran the different test
programs and I couldn't find the one that reports about the volume.
test-freebob gives this results, but I don't know if there is any volume
information there:
$ ./test-freebob discover
verbose level = 0
Using freebob library version: libfreebob 1.0.3
port = 0, devices_on_bus = 1
get info for device = 0, node = 0
Direction: 0 (capture)
Connection Info
===============
Number of connections: 1
Connection 0
-------------
[ 0] Id: 1
[ 0] Port: 0
[ 0] Node: 0
[ 0] Plug: 0
[ 0] Dimension: 11
[ 0] Samplerate: 48000
[ 0] IsoChannel: -1
[ 0] IsMaster: 0
[ 0] Number of stream infos: 11
StreamId Position Location Format Type DPort Name
--------------------------------------------------
[ 0]:[ 0] 0x01 0x00 0x06 0x02 0x00 MicIn1 left
[ 0]:[ 1] 0x06 0x01 0x06 0x02 0x00 MicIn1 right
[ 0]:[ 2] 0x02 0x00 0x06 0x03 0x00 LineIn 3+4 left
[ 0]:[ 3] 0x07 0x01 0x06 0x03 0x00 LineIn 3+4 right
[ 0]:[ 4] 0x03 0x00 0x06 0x03 0x00 LineIn 5+6 left
[ 0]:[ 5] 0x08 0x01 0x06 0x03 0x00 LineIn 5+6 right
[ 0]:[ 6] 0x04 0x00 0x06 0x03 0x00 LineIn 7+8 left
[ 0]:[ 7] 0x09 0x01 0x06 0x03 0x00 LineIn 7+8 right
[ 0]:[ 8] 0x00 0x00 0x06 0x04 0x00 SpdifIn left
[ 0]:[ 9] 0x05 0x01 0x06 0x04 0x00 SpdifIn right
[ 0]:[10] 0x0a 0x00 0x0d 0x0a 0x00 MidiPort_1
Direction: 1 (playback)
Connection Info
===============
Number of connections: 1
Connection 0
-------------
[ 0] Id: 1
[ 0] Port: 0
[ 0] Node: 0
[ 0] Plug: 0
[ 0] Dimension: 11
[ 0] Samplerate: 48000
[ 0] IsoChannel: -1
[ 0] IsMaster: 0
[ 0] Number of stream infos: 11
StreamId Position Location Format Type DPort Name
--------------------------------------------------
[ 0]:[ 0] 0x01 0x00 0x06 0x03 0x00 LineOut 1+2 left
[ 0]:[ 1] 0x06 0x01 0x06 0x03 0x00 LineOut 1+2 right
[ 0]:[ 2] 0x02 0x00 0x06 0x03 0x00 LineOut 3+4 left
[ 0]:[ 3] 0x07 0x01 0x06 0x03 0x00 LineOut 3+4 right
[ 0]:[ 4] 0x03 0x00 0x06 0x03 0x00 LineOut 5+6 left
[ 0]:[ 5] 0x08 0x01 0x06 0x03 0x00 LineOut 5+6 right
[ 0]:[ 6] 0x04 0x00 0x06 0x03 0x00 LineOut 7+8 left
[ 0]:[ 7] 0x09 0x01 0x06 0x03 0x00 LineOut 7+8 right
[ 0]:[ 8] 0x00 0x00 0x06 0x04 0x00 SpdifOut left
[ 0]:[ 9] 0x05 0x01 0x06 0x04 0x00 SpdifOut right
[ 0]:[10] 0x0a 0x00 0x0d 0x0a 0x00 MidiPort_1
In this thread:
http://linuxaudio.org/pipermail/linux-audio-user/2006-November/039911.html I
read about a test-volume program but I couldn't find it in the latest
source.
Thanks for any help1
Hector
On 8/20/07, Hector Centeno <hcengar@email-addr-hidden> wrote:
>
> Hi Daniel,
>
> Thank you for your response. I found a thread about that test application
> and I've been trying to build libfreebob but I had problems with it not
> finding libpthread. I have Fedora 7 and can't find the devel package of
> pthread anywhere.
>
> Cheers,
>
> Hector
>
>
> On 8/20/07, Daniel Wagner <wagi@email-addr-hidden> wrote:
> >
> > > I got an Edirol FA-101 and seems to be working fine with Planet
> > CCRMA/Fedora
> > > 7. The only problem I found is that it seems the output level is too
> > high. I
> > > have a pair of Adam A7 monitors plugged to it and I have to set their
> > levels
> > > to -30db, and even when I set them to the minimum (-60db) I can still
> > hear
> > > something! Is this related to the frebob driver? Is there a way to
> > lower the
> > > volume in the outputs?
> >
> > There is a test application for setting the volumes. But you have to
> > compile the freebob source yourself, since it is not shipped normally
> > (after all it is only a test application so far).
> >
> > daniel
> >
>
>
>
> --
> ===============================
> http://www.hcenteno.net
-- =============================== http://www.hcenteno.net
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Mon Aug 20 20:15:03 2007
This archive was generated by hypermail 2.1.8 : Mon Aug 20 2007 - 20:15:03 EEST