Thanks for your replies. I figured it out. I knew I would feel
foolish... My card is the older card and has no on-board mixing and no
cool utility. I have a hammerfall 96/52
card with AEB8-I and AEB8-O expansion boards for DACs.
Here was the problem
> > pmstudio@email-addr-hidden:~/m/sounds$ cat /proc/asound/card0/rme9652
snip_------------------------------------------------
> > ADAT1 Input source: ADAT1 optical
> >
> > IEC958 input: Coaxial
Needs to be Internal input source for my internal dacs. DOH!
it now reads:
ADAT1 Input source: Internal
IEC958 input: Internal
You might think I would notice that I need an *internal* source for an
*internal* dac.
I was able to change the input source using alsamixer.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Sat Nov 10 16:15:01 2007
This archive was generated by hypermail 2.1.8 : Sat Nov 10 2007 - 16:15:02 EET