Re: [LAU] Freebob problem with M-Audio Firewire Solo breakout box

Hi,

Am Samstag, 2. Februar 2008 schrieb Hartmut Noack:
> verymeta@email-addr-hidden schrieb:
> > $ jackd -d freebob
> > without the Solo plugged in, Jack won't start.

You want jack to use the device and wonder that jack wont start when the
device is not there???

> > But if the Solo is
> > plugged in Jack will start, and I get the messages:
> > JACK compiled with System V SHM support.
> > loading driver ..
> > SSE2 detected
> > Freebob using Firewire port 0, node -1
> > libiec61883 warning: Established connection on channel 0.
> > You may need to manually set the channel on the receiving node.
> > libiec61883 warning: Established connection on channel 1.
> > You may need to manually set the channel on the receiving node.

These messages are not directly from freebob but from some library-level
below. And they mean nothing, at least nothing freebob is concerned about.

> > Also, I don't know if this is meaningful in any way, but when I open
> > qjackctl and go to setup, the 'input device', 'output device', 'input
> > channels', and 'output channels' drop-down boxes are greyed out.
> the greyed out options do not apply to the freebob backend, if there is
> something to set, freebob does it.

The same applies to the other backends jack has: QJackCtl shows the boxes only
if the backend supports the options...

Arnold

-- 
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me 
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your 
administrator to do so...

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user