Re: [LAU] OT: Guitar level- Mic or Line?

From: Peter Hartmann <peter@email-addr-hidden>
Date: Wed May 28 2008 - 06:42:18 EEST

I recommend one the these preamps from k&k for high Z:

http://www.kksound.com/preamp97.html

I use one for my piezio pickup on my upright bass and I LOVE it. I
have also used it in the studio with electric bass.

Peter

On Tue, May 27, 2008 at 3:01 PM, Simon Williams
<simon@email-addr-hidden> wrote:
> Hello.
>
> I often run the PA system for my CU at uni. So far we've been using
> jack-jack leads to connect guitars to the desk. However, my Dad has
> recently started using jack-XLR leads at my home church and says that
> it's much better.
>
> After a very long conversation and lots of googling (which incidentally
> provides no info at all on the subject), I'm now completely confused.
>
> Are guitars mic or line or what?
>
> The rationale for using jack-XLR leads and connecting to the mic input
> on the desk is that guitars have mics in them so they are mic level.
> Apparently the battery unit in the guitar doesn't make it line level,
> but I'm not convinced.
>
> The other thing I don't understand is that if that is the case, why do
> people use DI boxes? A DI box takes a high impedance (line level - I
> think) input and converts it to low impedance output (mic level). If the
> guitar is mic level already then what's the point?
>
> Please, could someone shed some light on this because I'm now very confused.
>
> Thanks in advance.
> Simon
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Wed May 28 08:15:03 2008

This archive was generated by hypermail 2.1.8 : Wed May 28 2008 - 08:15:03 EEST