Fernando Lopez-Lezcano wrote:
> On Sun, 2008-12-14 at 15:20 -0600, The Other wrote:
>> The Other wrote:
>>> Then I looked into the /etc/pulse/default.pa file, and went into the
>>> ### Load Audio Drivers section and put in this:
>>>
>>> load-module module-alsa-sink
>>> load-module module-alsa-source device=hw:1,0
>
> One more caveat... the load of kernel modules is done now in parallel
> (if I understand things correctly so that the boot process is faster).
>
> That can have the unfortunate side effect that the order of the
> soundcards is not necessarily always the same... check the Planet CCRMA
> pages, there are instructions there on how to solve that.
>
> -- Fernando
I found your post of September 17, 2008 entitled [Fedora-music-list]
sound card order in fc9. These are the instructions you are referring to?
I'll check them out tonight.
This may explain why my device=hw:[Audigy2] lines didn't work after a
reboot. I changed it to device=hw:1,0 and that seemed to work.
cat /proc/asound/cards currently shows:
0 [Audigy2]
1 [I82801BAICH2]
But this may be a lucky selection of cards when I rebooted, as you're
stating. Oh well, I thought I had this fixed.
As I said, later tonight I'll go through your references.
Thanks Fernando,
Stephen.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Wed Dec 17 16:15:01 2008
This archive was generated by hypermail 2.1.8 : Wed Dec 17 2008 - 16:15:02 EET