On Mon, 09 Feb 2009 18:04:40 +0100
Jörn Nettingsmeier <nettings@email-addr-hidden-hochschule.de> wrote:
> Simon W. Fielding wrote:
> >
> > OK - I now have a working basic FC10 system - relevant details are :-
> >
> > Hardware: Toshiba Tecra M3
> > Kernel: 2.6.26.8-1.rt15.1.fc10.ccrma.i686.rt
> > Jackd: jackdmp 1.9.1
> > ffado: 2.0-0.6.rc1.fc10.ccrma (libffado 1.999.40)
> >
> >
> > Initial cursory testing shows (no recording load, just an idle mixer
> > with nothing connected) :-
> >
> > jackd -R -dfirewire -r96000 -p16 -n3 ... jackd won't even start - uses
> > too much CPU
> > jackd -R -dfirewire -r96000 -p32 -n3 ... jackd won't even start - uses
> > too much CPU
>
> these are insanely low settings.
> i have never *ever* heard of anybody running successfully at -p16 -n3,
> and you are trying it at 96k. for the rest of us, that would be -p8!
>
> imnsho, -p128 should be perfectly fine for 96k. don't waste your time
> "tuning" your system for latencies below that.
Meh. If you ask me, negative latency is the future.
pete.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Mon Feb 9 20:15:02 2009
This archive was generated by hypermail 2.1.8 : Mon Feb 09 2009 - 20:15:02 EET