Re: [LAU] [PlanetCCRMA] Mixer Wowes

From: TheOther <theother1510@email-addr-hidden>
Date: Fri May 15 2009 - 05:19:02 EEST

William M. Quarles wrote:
> TheOther wrote:
>>> David, or Fernando, or ANYBODY else out there, do you have any idea why
>>> this isn't working for me? Something smells funny about Pulseaudio, but
>>> I don't know enough about it to be able to say why.
>> Hello William,
>>
>> You can check the PlanetCCRMA archives to see my thoughts and
>> experiences with PulseAudio.
>>
>> If you have Fedora 10 installed, remove PulseAudio.
>>
>> If you are using Fedora 7, 8, or 9, then upgrade to Fedora 10 so you
>> can remove PulseAudio.
>>
>> Good Luck,
>> Stephen.
>
> Sounds good to me, I don't even know what PulseAudio does other than it
> kept Rhythmbox from working when I first installed Fedora 10 on a
> computer. But what dependencies will I be breaking? Last time that I did
> that, I also found like a dozen or so other applications that depended
> on PulseAudio that my RPM database apparently didn't know about.
>
> I'll give it a shot!
>
> Thanks,
> William

I went from Fedora 6 (no PulseAudio) to Fedora 9 (PulseAudio). Under
Fedora 9, trying to remove PulseAudio also removed KDE and Gnome.
That was unthinkable. In Fedora 10 you can now remove PulseAudio
without problems.

If you have Fedora 9 (and probably this will work for Fedora 7 and 8),
enter your hardware BIOS at bootup time and disable the motherboard
sound chip. Leave PulseAudio installed.

In this case the PulseAudio server fails to start. Your audio
applications will then use ALSA, OSS, Jack, or whatever else you are
using for sound. For me, my problems were solved. My PCI sound card
was recognized as the default, and the Linux applications that are
hard coded for the default sound device worked with my PCI sound card
as expected.

 From this (disabling the motherboard sound chip) I inferred that
PulseAudio was developed as a means for helping Windows users transfer
to Linux in a painless manner. I'm assuming PulseAudio was never
intended to be useful for advanced Linux audio users, because it
wasn't checking for additional sound chips/cards/devices *and*
allowing the user to specify the order in which those sound
chips/cards/devices would be used. PulseAudio always defaulted to the
motherboard sound chip, and a fair number of Linux sound applications
always default to the default sound chip/card/device (which in the
case of PulseAudio will be the motherboard sound chip.) Hence, you're
having all this trouble in trying to use a special video/audio card
because PulseAudio and very likely your sound application are only
trying to use your motherboard sound chip, since that is the default.

Hope this helps,
Stephen.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Fri May 15 08:15:01 2009

This archive was generated by hypermail 2.1.8 : Fri May 15 2009 - 08:15:02 EEST