Re: [LAU] how to enable capture from Behringer UCA202 USB?

From: Leonardo Palomares <leoave@email-addr-hidden>
Date: Tue May 19 2009 - 02:28:10 EEST

On Mon, May 18, 2009 at 1:43 AM, shane richards <shanerich@email-addr-hidden> wrote:
> Hi all,
> Just bought a neat-o Behringer USB adaptor, UCA202.
> There is *no* volume control listed in alsamixer for the capture device, however it is definately recognised.

The UCA202 doesn't have a "IN" level control, you have tu adjust gain
at the "OUT" you conected to
(fisical mixer, or whatever is giving signal to de 202)

For cheapo sound adapter this has been the best for 2 years now.(for me)

It is waaay better than onboard sound.
Even that it does record/play 16bit/48khz only, sounds prettygood for 30 dlls

> Qjackctl shows following devices (both in capture and playback:

just get it connected and you will rock!

-- 
Leonardo Palomares
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Tue May 19 04:15:02 2009

This archive was generated by hypermail 2.1.8 : Tue May 19 2009 - 04:15:02 EEST