Re: [LAU] Jamin for FOH (was: Re: JAMin updates?)

From: Fons Adriaensen <fons@email-addr-hidden>
Date: Wed Aug 05 2009 - 15:53:00 EEST

On Wed, Aug 05, 2009 at 10:18:57AM +0200, Arnold Krille wrote:

> Some kind of PA-managment that does:
>
> a.1) Frequency-X-over and EQ (and phase and that)
> a.2) If EQ is to simple nowadays (as some Fons guy tells me:), sophisticated
> digital filters...
> b) Multiband-compressor (one per output or with independant frequency ranges)
> and limiters for the outputs.

The Lake (later Dolby) processors used to be one of the
standard solutions for this (and are still used today),
see <http://www.dolby.com/professional/Live_Sound/>.
They are no longer sold AFAIK, one of the reasons being
that manufacturers of PA systems are integrating this
sort of technology, see e.g. <http://www.labgruppen.com/>
and <http://www.qscaudio.com/products/dsp/dsp30/dsp30.htm>.

Integrating xover filtering, EQ, and limiting and sometime
even the power amp brings some important advantages - it
removes many connections, gain controls and other things
that could be done or set wrong and render such processing
completely useless, and it allows to adapt the processing
to specific speaker units and combinations, usually selected
from a menu on the user interface, or by networked remote
control apps. A big PA system today is completely set up
and monitored via network connections, and this can include
things such as amplifier and even speaker temperatures.

You can do all of this on a PC, but it's a shaky solution
unless you do some further integration - for one there will
be far too many gain controls after the processor, making
nonsense of any carefully set limiter levels and exactly
matched xovers. One other problem is to find the proper
settings for your hardware, and that is one reason why this
job is today done mostly by the speaker manufacturers who
have precise information about the electrical, mechanical
and thermal limits of their products.

> c) Automatic (and live!) comparison of the input signal that is routed to the
> outputs and the signal from one or more measurement microphones to adapt to
> the room with only a mouse-click. And to re-adapt to the room when the crowd
> is in.
> d) Feedback-destroyer (which will probably be hard to do while c) is running
> its adaption.

Not so simple but certainly possible and much more suited
to software based solutions.

Ciao,

-- 
FA
Io lo dico sempre: l'Italia è troppo stretta e lunga.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Wed Aug 5 16:15:08 2009

This archive was generated by hypermail 2.1.8 : Wed Aug 05 2009 - 16:15:08 EEST