martin@cft2:~$ dmesg | tail -n 100 [ 3.449614] [] ? _spin_unlock_irqrestore+0x4a/0x50 [ 3.449620] [] ? wake_up_new_task+0xf4/0x140 [ 3.449625] [] ? do_fork+0x130/0x320 [ 3.449632] [] ? fput+0x1f/0x30 [ 3.449639] [] ? filp_close+0x49/0x70 [ 3.449645] [] do_notify_resume+0x3d/0x40 [ 3.449650] [] work_notifysig+0x13/0x23 [ 3.449654] ---[ end trace 1ddc92b07559fed8 ]--- [ 3.688494] usbcore: registered new interface driver hiddev [ 3.703186] input: Fujitsu Takamisawa USB Touch Panel as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input5 [ 3.716119] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.716171] 8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.725198] generic-usb 0003:0430:0501.0001: input,hidraw0: USB HID v1.00 Mouse [Fujitsu Takamisawa USB Touch Panel] on usb-0000:00:1d.2-1/input0 [ 3.725235] usbcore: registered new interface driver usbhid [ 3.725241] usbhid: v2.6:USB HID core driver [ 3.729325] 8139too Fast Ethernet driver 0.9.28 [ 3.729400] 8139too 0000:01:01.0: PCI INT A -> Link[LNKD] -> GSI 3 (level, low) -> IRQ 3 [ 3.730835] eth0: RealTek RTL8139 at 0x2000, 00:0b:97:27:48:d8, IRQ 3 [ 3.730840] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 4.304049] Marking TSC unstable due to cpufreq changes [ 4.382821] PM: Starting manual resume from disk [ 4.382827] PM: Resume from partition 8:3 [ 4.382830] PM: Checking hibernation image. [ 4.383079] PM: Resume from disk failed. [ 4.435892] kjournald starting. Commit interval 5 seconds [ 4.435921] EXT3-fs: mounted filesystem with ordered data mode. [ 4.820047] Clocksource tsc unstable (delta = -177765034 ns) [ 13.772837] udev: starting version 141 [ 13.967291] Linux agpgart interface v0.103 [ 13.997776] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 13.998287] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 14.000362] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 14.018493] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/input/input6 [ 14.040245] ACPI: Video Device [GRFX] (multi-head: yes rom: no post: no) [ 14.116806] intel_rng: FWH not detected [ 14.171084] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.543798] iTCO_vendor_support: vendor-support=0 [ 14.549205] ieee80211_crypt: registered algorithm 'NULL' [ 14.675625] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 14.776748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 14.776925] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 14.777065] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.792767] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 14.792772] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 14.892415] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 15.221795] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 15.221805] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 15.222476] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7 [ 15.222485] PCI: setting IRQ 7 as level-triggered [ 15.222496] ipw2200 0000:01:04.0: PCI INT A -> Link[LNKF] -> GSI 7 (level, low) -> IRQ 7 [ 15.226929] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 15.227191] ipw2200 0000:01:04.0: firmware: requesting ipw2200-bss.fw [ 15.605316] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 15.605503] yenta_cardbus 0000:01:05.0: CardBus bridge found [10f7:8338] [ 15.735806] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 15.735847] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 15.735928] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 15.747923] yenta_cardbus 0000:01:05.0: ISA IRQ mask 0x0030, PCI irq 10 [ 15.747929] yenta_cardbus 0000:01:05.0: Socket status: 30000820 [ 15.747936] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #02 to #05 [ 15.747949] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 15.747956] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean. [ 15.748442] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 15.748448] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 15.860099] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x396eb2, caps: 0x804753/0x0 [ 15.900971] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 16.387813] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 16.501999] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 16.503965] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 16.508427] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 16.509201] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 16.510386] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 16.548059] intel8x0_measure_ac97_clock: measured 50243 usecs [ 16.548069] intel8x0: clocking to 48000 [ 16.902101] lp: driver loaded but no devices found [ 17.028529] Adding 489972k swap on /dev/sda3. Priority:-1 extents:1 across:489972k [ 17.606069] EXT3 FS on sda2, internal journal [ 19.055458] type=1505 audit(1259623336.601:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1953 [ 19.158838] type=1505 audit(1259623336.704:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1957 [ 19.159126] type=1505 audit(1259623336.705:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1957 [ 19.159219] type=1505 audit(1259623336.705:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1957 [ 19.159295] type=1505 audit(1259623336.705:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1957 [ 19.485084] type=1505 audit(1259623337.031:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1962 [ 19.485490] type=1505 audit(1259623337.031:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1962 [ 19.552480] type=1505 audit(1259623337.098:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1966 [ 19.815309] eth0: link down [ 19.815413] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.657097] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.657104] Bluetooth: BNEP filters: protocol multicast [ 23.703606] Bridge firewalling registered [ 25.584074] ppdev: user-space parallel port driver [ 26.836196] [drm] Initialized drm 1.1.0 20060810 [ 26.871077] pci 0000:00:02.0: power state changed by ACPI to D0 [ 26.871096] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 26.871105] pci 0000:00:02.0: setting latency timer to 64 [ 26.871439] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 26.874667] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 26.874706] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 28.489771] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 40.022042] eth1: no IPv6 routers present martin@cft2:~$ lspci 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) 01:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 88) 01:05.1 System peripheral: Ricoh Co Ltd R5C575 SD Bus Host Adapter martin@cft2:~$ cat /proc/asound/cards 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with STAC9750,51 at irq 9 martin@cft2:~$