Re: [LAU] yoshimi creeps... 0.051

Hello all,
Same problem over here, after installing fltk2 the fltk/Color.h
problem was solved and it installed correctly.

Now on the startup stage I'm getting this error, which seems to be
related to jack or midi setup:

Error, failed to start jack midi thread: 1
So sad, failed to start MusicIO

***** here's the entire output:

diego@email-addr-hidden-laptop:~$ /usr/bin/jackd -dalsa -dhw:0,0 -r44100 -p1024 -n2 &
[1] 8456
diego@email-addr-hidden-laptop:~$ no message buffer overruns
jackd 0.116.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

JACK compiled with System V SHM support.
loading driver ..
SSE2 detected
apparent rate = 44100
creating alsa driver ... hw:0,0|hw:0,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback

diego@email-addr-hidden-laptop:~$
diego@email-addr-hidden-laptop:~$
diego@email-addr-hidden-laptop:~$ yoshimi
SSE2 detected
Error, failed to start jack midi thread: 1
So sad, failed to start MusicIO
Yoshimi stages a strategic retreat :-(
Floating point exception
diego@email-addr-hidden-laptop:~$
diego@email-addr-hidden-laptop:~$

Any idea on this error?
Thank you very much in advance,
BR
Diego

2010/1/13 Philipp Überbacher <hollunder@email-addr-hidden>:
> Excerpts from cal's message of Wed Jan 13 17:02:43 +0100 2010:
>> Sorry folks. As seems to be my custom whenever I put out an update, 0.051
>> is broken, hence it's removal from SF (leaving it on graggrag was an oversight).
>>
>> David Adler wrote:
>> > [ ... ]
>> > /home/abs/yoshimi/src/yoshimi-0.051/src/MasterUI.h:28:24: error:
>> > fltk/Color.h: No such file or directory
>>
>> Sloppy work on my part, the include needs to be deleted.
>>
>> [ ... ]
>> > $ yoshimi
>> > gzopen failed, errno 2, No such file or directory
>> > Error, xml file /home/user/.zynaddsubfxXML.cfg could not be loaded or
>> > uncompressed
>> > BUG!: XMLwrapper::peek() - empty parentstack
>> > BUG!: XMLwrapper::peek() - empty parentstack
>>
>> As someone else mentions, this one has come up before, but I haven't figured it
>> out yet (clearly).
>>
>> The fabulous new recorder start logic in 0.051 is also quite broken. It works
>> fine with jack audio + jack midi and alsa audio + alsa midi, but not with jack
>> audio + alsa midi or alsa audio + jack midi.
>>
>> > Thanks for zyn, thanks again for yoshimi,
>>
>> Given the crap I regularly dish out, you people are incredibly patient and
>> tolerant, very much appreciated. Health since Christmas has been ordinary, and
>> so has the code I've produced :-(. I think I'm close to the point where I have
>> to give this away, but meanwhile I'll fix it as soon as I can.
>>
>> cheers, Cal
>
> yep 0.051 doesn't even start after a clean install since it seems to
> miss a conf file:
>  yoshimi
>  gzopen failed, errno 2, No such file or directory
>  Error, xml file /home/murks/.zynaddsubfxXML.cfg could not be loaded
>  or
>  uncompressed
>  BUG!: XMLwrapper::peek() - empty parentstack
>  BUG!: XMLwrapper::peek() - empty parentstack
>  Segmentation fault
>
> Thanks for all the effort you put into this Cal.
> I wish you best health.
>
> Regards,
> Philipp
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Jan 15 16:15:02 2010