Re: [LAU] Synth: Dubstep Bass

From: Gabriel M. Beddingfield <gabrbedd@email-addr-hidden>
Date: Sat Jun 05 2010 - 21:19:02 EEST

Hey Patrick,

On Sat, 5 Jun 2010, Patrick Shirkey wrote:

>> Basically your signal chain should go:
>>
>> Oscillators -> Filter in -> Output
>> ^
>> |
>> LFO
>>
[snip]
>
> Not sure if the ascii came out correct. So what I need is a low pass that
> has two input connections? A CV input and a signal input?
>
> The LFO feeds the cv input and the oscillator/s feed the normal(?) input.

Using AMS, here's a nice ASCII-art patch. I'm omitting
unused ports, envelopes, and the MCV input, assuming you can
figure that part out.

   +------+
   | VCO |
   = Freq | +------------+
   | | | Mixer 2->1 |
   | Sine =----= In 0 |
   +------+ | |
            +--= In 1 | +------+
   +------+ | | | | VCF |
   | VCO | | | Out =------= In |
   = Freq | | +------------+ | |
   | | | +---= Freq | +---------+
   | Saw =-+ | | | | PCM Out |
   +------+ +-------+ | | Out =---= Out 0 |
                 | LFO | | +------+ | |
                 | Sine =-----+ = Out 1 |
                 +-------+ +---------+

Note that at low freqs, the Sawtooth wave will easily overpower the
Sine-wave, so you may have to play with the Mixer to get the mix you
want.

-gabriel
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Jun 6 00:15:02 2010

This archive was generated by hypermail 2.1.8 : Sun Jun 06 2010 - 00:15:02 EEST