As I mentioned in my previous email, and is also written in the
manual, the "mic" input is a combi plug which accepts either 1/4" jack
plug OR XLR. Basically, it has an extra hole in the middle of it. I
would assume that when both inputs (combi and jack) are switched to
"line" the levels would be identical.
James
On 16/07/2010, Louigi Verona <louigi.verona@email-addr-hidden> wrote:
>>
>>
>> No it has 2 line inputs (both mono) - so you would have to split your
>> stereo signal into 2 mono inputs - by using a splitter lead or
>> whatever..
>>
>> James
>>
>
>
> A splitter I have.... but where ARE those two mono inputs? on the picture I
> saw only one
> jack input and the other that mic input. You cannot use different plugs to
> feed a stereo signal,
> as far as I know they have different voltages and you would end up with
> different volumes or whatnot.
>
>
> --
> Louigi Verona
> http://www.louigiverona.ru/
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sat Jul 17 00:15:02 2010
This archive was generated by hypermail 2.1.8 : Sat Jul 17 2010 - 00:15:02 EEST