Re: [LAU] [LAD] Some new things to play with

On Mon, Oct 11, 2010 at 03:31:58AM +0400, alex stone wrote:

> On Mon, Oct 11, 2010 at 3:13 AM, <fons@email-addr-hidden> wrote:
>
> > Mmm. Using 8 reverbs for a single orchestral mix doesn't make
> > any sense - unless you are doing something psychedelic (*) they
> > all play in the same space. It's easy to share a reverb for any
> > number of channels even if the dry/wet ratio is different for
> > each.
>
> Using sample libs, which can vary in the amount of "presence" that is
> recorded with instrument/sections, means multiple verb instances can
> bring a little more consistency across the entire orchestra. My
> example is of the 3 complete Strings libs i have, where 1 has more
> presence in the base samples than the other 2. So i have to be careful
> not to add too much to 1, and a little more to the other 2.
> (And this is also true when blending "bright" string sections with
> those that are duller. the duller samples tend to need a bit more
> presence, and the bright samples survive with less, but conversely,
> also need EQ'ing a little, to not stand out so much.)

None of this means you need to use more than one reverb, and if
the target is to have more consistency you definitely should use
just one.

Reverb is a linear operation.

If F1, F2, F3 are linear operations (EQ, delay, gain), then

  F1 (reverb (x1)) + F2 (reverb (x2)) + F3 (reverb (x3))

is the same as

  reverb (F1 (x1) + F2 (x2) + F3 (x3))

which uses just one reverb.

* Set the reverb to 100% 'wet' and connect the outputs to your
  main mixing bus.

* Send controlled amounts of each channel/group/section (after
  fader) to the reverb input. You can even equalise or delay
  these separately.

Ciao,

-- 
FA
There are three of them, and Alleline.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user