Re: [LAU] edirol fa101 on differant rate that 48k ?

From: Lorenzo Sutton <lsutton@email-addr-hidden>
Date: Tue Nov 16 2010 - 16:49:41 EET

Hi try:

- stopping jack
- unplug the card
- change the sample rate knob
- replug the card
- change the sample rate in jack settings (or in jackd command line)
- start jack

Does it work?

Lorenzo

Dragan Noveski wrote:
> hallo list,
> i borrowed yesterday an edirol fa-101 in order to try if it will work
> on my sidux/aptosid mix.
> after some tweaking around and reading errors in qjack's messages
> window i get it to work really nicely in 48kHz mode. with all other
> sample rates which the card seems to be providing ( and is providing
> on my friends mac...) i could not get it to run.
> on a ffado page the card is listed as 'full supported', so i
> understood that also different SR should work. i also realized that
> turning the SR knob on the card does not changes nothing and that the
> SR is given in jackd's command line.
> could someone who is using this card please make some comments on this?
>
> cheers,
> doc
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Nov 16 20:15:02 2010

This archive was generated by hypermail 2.1.8 : Tue Nov 16 2010 - 20:15:02 EET