On 06/07/2011 04:20 AM, Ralf Mardorf wrote:
> I can run
>
> $ jackd --sync -Xalsarawmidi -dalsa -r48000 -p1024
>
> without getting an error message, it's the same for
>
> $ jackd --sync -dalsa -r48000 -p1024
>
> but if I run qjackctl I get
>
> 03:11:54.885 Patchbay deactivated.
> 03:11:54.887 Statistics reset.
> 03:11:54.913 Could not open ALSA sequencer as a client. ALSA
> MIDI patchbay will be not available.
> ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq
> failed: Permission denied
> Cannot connect to server socket err = No such file or directory
> Cannot connect to server socket
> jack server is not running or cannot be started
lsmod | grep snd
you will need to load the alsa sequencer module.
> The "Xilinx RME Hammerfall DSP MADI" is the RME HDSPe AIO, shouldn't the
> name be correct for the new driver/firmware?
the MADI, AIO and raydat cards are very similar hardware and use the
same driver, looks like there's some mixup in there. you can ignore it,
but yes, it should be fixed.
> When running Jack, instead of showing the name DSP MADI and two MIDI
> devices for the DSP MADI, there's no name and only one MIDI device for
> the first card, hence the driver/firmware was switched?
unlikely. the real hdspm MADI has three midi devices.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Jun 7 12:15:02 2011
This archive was generated by hypermail 2.1.8 : Tue Jun 07 2011 - 12:15:02 EEST