On Wed, Oct 26, 2011 at 1:04 PM, Michelle Konzack
<linux4michelle@email-addr-hidden-dogan.net> wrote:
> Hello Charles Henry,
>
> I am Electronic Engineer and a little bit more...
>
> Am 2011-10-25 14:21:12, hacktest Du folgendes herunter:
>> The code itself (VHDL or Verilog) is hardware independent, but a
>> compiled file is specific for a particular FPGA device. Users won't
>> ever want to have to build from source--just flash binaries.
>
> I do not know VHDL/Verilogand have never programmed a FPGA, but do you
> do this under Linux or do you use propriatary tools of the FPGA
> manufacturers?
As far as I know, there's no open source tools to compile FPGA code.
It's always device specific. Starting with VHDL/Verilog source
(device independent) and an I/O pin-mapping file (per device), you
generate a net-list file and then it has to be mapped/routed for the
specifc device. Any advice on tools to use or study is most welcome.
It seems to be a lengthy process that takes some skill. So developing
the binaries to be flashed is a bit outside most users' ability--but
flashing from JTAG headers can be accomplished by a few free tools.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu Oct 27 00:15:04 2011
This archive was generated by hypermail 2.1.8 : Thu Oct 27 2011 - 00:15:04 EEST