[LAU] First netjack test using jackd2: ecasound transport doesn't move

These are my first netjack experiments, ever.
I followed this reference:

http://trac.jackaudio.org/wiki/WalkThrough/User/NetJack

Here is what I did:

#### sound server side (with local soundcard)

$ jackd -d alsa hw:0,0 -r 44100

$ jack_netsource -H thinkpad

Connected :-)
netjack: at frame 000051 -> total netxruns 1 (1%) queue time= 93121

$ ecasound -i test.wav -o jack,system

[ sound plays ]

^C

#### client side

$ jackd -d netone

NetOne driver started
AutoConfig Override !!!
AutoConfig Override: Master JACK sample rate = 44100
AutoConfig Override: capture_channels_audio = 2
AutoConfig Override: capture_channels_midi = 1
AutoConfig Override: playback_channels_audio = 2
AutoConfig Override: playback_channels_midi = 1
MTU is set to 1400 bytes

$ jack_lsp

system:capture_1
system:capture_2
system:capture_3
system:playback_1
system:playback_2
system:playback_3

$ ecasound -i cdda.wav -f f32_le,2,44100 -o jack,<CLIENT>,<TRANSPORT> -c

for TRANSPORT settings: send sendrec notransport

for JACK CLIENT setting: "system" and "system:playback_1"

The transport stays stuck at position 0.0, and the
'start' command does not start the engine,
which remains in status 'stopped'.

Grateful for ideas where I should go next,

Thanks,

-- 
Joel Roth
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user