Re: [LAU] BCF2000, qjackctl and ardour

From: Paul Davis <paul@email-addr-hidden>
Date: Mon Sep 10 2012 - 22:14:34 EEST

On Mon, Sep 10, 2012 at 2:56 PM, Kevin Cosgrove <kevinc@email-addr-hidden> wrote:

> Hiya,
>
> A few years back I was using my BCF2000 with ardour. After upgrades
> to my computer hardware and Linux distribution the combination no
> longer works.
>
> The BCF shows up in /proc/asound fine. I can send and receive data
> with the BCF using amidi.
>
> The test of tracing communication between the BCF and ardour fails.
> I think this is because the mcu (port?) of ardour isn't connected to
> the BCF. But, qjackctl won't let me connect those. They don't
> show up in the MIDI tab of qjackctl. They only show up in the ALSA
> tab of qjackctl.
>

run a2jmidid -e

if you want a second rate solution, use JACK's "builtin" ALSA MIDI support
via the "MIDI Driver" selector at teh bottom left of the setup dialog.

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Sep 11 00:15:02 2012

This archive was generated by hypermail 2.1.8 : Tue Sep 11 2012 - 00:15:02 EEST