Re: [LAU] BCF2000, qjackctl and ardour

On Mon, September 10, 2012 5:57 pm, Kevin Cosgrove wrote:
> On 10 September 2012 at 15:14, Paul Davis <paul@email-addr-hidden>
wrote:
>
>> > A few years back I was using my BCF2000 with ardour. After upgrades
to my computer hardware and Linux distribution the combination no
longer works.
>> >
>> > The BCF shows up in /proc/asound fine. I can send and receive data
with the BCF using amidi.
>> >
>> > The test of tracing communication between the BCF and ardour fails. I
think this is because the mcu (port?) of ardour isn't connected to
the BCF. But, qjackctl won't let me connect those. They don't show
up in the MIDI tab of qjackctl. They only show up in the ALSA tab of
qjackctl.
>> >
>>
>> run a2jmidid -e

> Right now MIDI Driver is set to "raw". I'm not sure when or if
> I set that, or whether it might be the default.

Try none. Raw takes the place of a2j

-- 
Len Ovens
www.OvenWerks.net
-- 
Len Ovens
www.OvenWerks.net
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user