Re: [LAU] CM6206 S/PDIF JACK input

Hi Len!

Yes, I only see 2 JACK capture ports but 7 or 8 outputs. I don't think I
need AC3 or even stereo capture (although that would be a plus) to work as
the real intent is to use this adapter to capture the output of a KORG D16
multitrack into JACK

I dug out my ol' SHARP CD/MD deck to use its optical out for a quick test
this morning before work. I got rid of the experimental ALSA config, made
sure that SPDIF In was enabled under ALSA mixer, connected my SHARP,
started playing a CD and then started JACK but still I only got 2 capture
ports (mic L and R). I then stopped JACK and fired up Audacity but that
didn't seem to let me select SPDIF in as a capture source either.

I've not tried arecord yet but if I can't get the SPDIF In visible as a
JACK capture port then the adapter is no use to me.

On Tue, Nov 13, 2012 at 5:42 AM, Len Ovens <len@email-addr-hidden> wrote:

>
> On Mon, November 12, 2012 4:24 pm, Dan MacDonald wrote:
> > Hi Len!
> >
> > Thanks for your reply but it seems like half an answer to me as you
> didn't
> > tell me what to do with the output of arecord -L?
> >
> > I found a seemingly relevant thread on the LM forums where someone
> managed
> > to get their SPDIF working under JACK by writing a custom ALSA config
> file
>
> The s/pdif in signal you are using is stereo? It seems AC3 streams will
> not work on these cards.
>
> --
> Len Ovens
> www.OvenWerks.net
>
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Nov 13 12:15:02 2012