Re: [LAU] CM6206 S/PDIF JACK input

Hi Paul!

I don't have the device with me here but I'll see if you're online in about
5-6 hours time.

Thanks!

Dan

On Tue, Nov 13, 2012 at 11:40 AM, Paul Davis <paul@email-addr-hiddenwrote:

>
>
> On Tue, Nov 13, 2012 at 4:24 AM, Dan MacDonald <allcoms@email-addr-hidden> wrote:
>
>> Hi Len!
>>
>> Yes, I only see 2 JACK capture ports but 7 or 8 outputs. I don't think I
>> need AC3 or even stereo capture (although that would be a plus) to work as
>> the real intent is to use this adapter to capture the output of a KORG D16
>> multitrack into JACK
>>
>> I dug out my ol' SHARP CD/MD deck to use its optical out for a quick test
>> this morning before work. I got rid of the experimental ALSA config, made
>> sure that SPDIF In was enabled under ALSA mixer, connected my SHARP,
>> started playing a CD and then started JACK but still I only got 2 capture
>> ports (mic L and R). I then stopped JACK and fired up Audacity but that
>> didn't seem to let me select SPDIF in as a capture source either.
>>
>> I've not tried arecord yet but if I can't get the SPDIF In visible as a
>> JACK capture port then the adapter is no use to me.
>>
>
> there's some confusion here. i suggest you get on IRC. i'll be on there in
> somewhere between 30mins and 2hrs. #jack
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Nov 13 16:15:02 2012