On Tue, 22 Jan 2013 22:26:57 +0100, Bob van der Poel <bob@email-addr-hidden>
wrote:
> Anyone with experience using the UCA202? I tried it the other day
> using audacity and found that it played and recorded just fine if it
> was only doing one or the other. But, if I had existing tracks in
> audacity and played those (only 1 stereo) and recorded a 2nd track ...
> the recorded track sounded like it was filtered though a motorboat
> engine (sputter, sputter ...).
>
> I did the recording again directing the output to an existing device
> and all worked fine. So the setup seems to be useable. I am thinking
> that audacity (alsa?) can't read+write to the device?
>
> I'm running Ubuntu 12.04. Didn't have jack running.
Perhaps you need to unbind some devices to use the USB device in duplex
mode? USB 1 is AFAIK (I might be mistaken) not very fast, but perhaps it
helps to get rid of other devices sharing the same IRQ.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Jan 23 00:15:03 2013
This archive was generated by hypermail 2.1.8 : Wed Jan 23 2013 - 00:15:03 EET