Re: [LAU] Behringer UCA202

On Wed, Jan 23, 2013 at 12:58 AM, Jannis Achstetter
<jannis_achstetter@email-addr-hidden> wrote:
> Am 22.01.2013 22:26, schrieb Bob van der Poel:
>> Anyone with experience using the UCA202? I tried it the other day
>> using audacity and found that it played and recorded just fine if it
>> was only doing one or the other. But, if I had existing tracks in
>> audacity and played those (only 1 stereo) and recorded a 2nd track ...
>> the recorded track sounded like it was filtered though a motorboat
>> engine (sputter, sputter ...).
>>
>> I did the recording again directing the output to an existing device
>> and all worked fine. So the setup seems to be useable. I am thinking
>> that audacity (alsa?) can't read+write to the device?
>>
>> I'm running Ubuntu 12.04. Didn't have jack running.
>
> What samplerate are you using? I have problems running the device at
> 44.1kHz but it works fine when using 48kHz

I was using the default 44.1. I didn't know that one could change the
rate on this device. I'll give that a go as well.

-- 
**** Listen to my CD at http://www.mellowood.ca/music/cedars ****
Bob van der Poel ** Wynndel, British Columbia, CANADA **
EMAIL: bob@email-addr-hidden
WWW:   http://www.mellowood.ca
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user