Re: [LAU] using multiple ams patches

On Sun, Mar 17, 2013 at 4:40 PM, rosea.grammostola wrote:
> Hi,
>
> If you want to use multiple AMS patches at onces, you've to load multiple
> instances of AMS right?
>
> How should I route midi output from a sequencer or hardware controller with
> one single midi output to those multiple instances of AMS without triggering
> all the AMS instances? AFAIK qmidiroute has only 2 output ports.

hi

Start multiple instances of ams and in the 'Control Center',
bottom left, select the Midi channel to listen, default is 'Omni'.

shortcoming:
That setting won't get saved with the patches, ams starts with
the setting that was active on last application quit.

This appears to be a known shortcoming, the MCV module has
(at least in cvs) that 'reserved for later use'-parameter, which is
meant to become a Midi channel selector.
Once that is implemented, one instance of ams will be usable
as a true multi-channel synth.

greetings
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Mar 17 20:15:03 2013