On Wed, April 3, 2013 3:18 am, Jostein Chr. Andersen wrote:
> Mackie 802-vlz3, but my mic preamps (3 of them) are always occupied, so
> it's only channel line inputs (or "tape in") left.
>
> When I connect the BR-80 to the input channel, then I have to turn the
> channel level to max and the mic levels very low, only a slight turn on
> gain by accident will mess up the mix. This is very annoying in a
> stressful live situation where I want everything to work at once.
What price range are you looking at? I would imagine this will work:
http://artproaudio.com/art_products/signal_processing/usb_audio_devices/product/usb_dual_pre_ps/
I have seen them as low as $90
Unless you have parts on hand a diy solution may be just as much. But you
can try looking through these:
http://www.diyrecordingequipment.com/directory/
Stay away from anything that requires a pre etched board or the price goes
up fast. This kit for example does less and costs more by the time you add
the case.
http://www.paia.com/phantom.asp
-- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Wed Apr 3 20:15:01 2013
This archive was generated by hypermail 2.1.8 : Wed Apr 03 2013 - 20:15:01 EEST