Re: [LAU] Soundcard DSP2000 is not recognized any more

Many thanks,
I will try it tomorrow.

Chris
Am 01.05.2013 08:44 schrieb "Clemens Ladisch" <clemens@email-addr-hidden>:

> Chris Bungue wrote:
> > [ 16.932523] cannot find the slot for index 0 (range 0-5), error: -16
>
> The driver tried to load at index 0, but another driver already has it:
>
> > 0 [Device ]: USB-Audio - PnP Audio Device
> > PnP Audio Device at usb-0000:00:02.0-7, full speed
> > 1 [M4x4 ]: USB-Audio - MidiSport 4x4
> > M-Audio MidiSport 4x4 at usb-0000:00:02.0-1, full
> speed
> > 3 [U0x71040x2202 ]: USB-Audio - USB Device 0x7104:0x2202
> > USB Device 0x7104:0x2202 at usb-0000:00:02.0-4,
> full speed
> > 5 [VirMIDI ]: VirMIDI - VirMIDI
> > Virtual MIDI Card 1
>
> > options snd_ice1712 index=0
> > options snd_usb_audio index=1
> > options snd_usb_audio index=2
> > options snd_virmidi index=4
>
> You have *three* USB audio devices; and all settings for one module must
> go into one line:
>
> # options snd-usb-audio index=1,2,3
>
> However, instead of that, there is a better option that allows you to
> set the order correctly even if additional devices appear:
>
> options snd
> slots=snd-ice1712,snd-usb-audio,snd-usb-audio,snd-usb-audio,snd-virmidi
>
> To set the order of the USB devices, read the vendor and/or device IDs
> with lsusb, and give those to the snd-usb-audio driver with the vid/pid
> options. This line sets the MidiSport first and the unnamed device
> second:
>
> options snd-usb-audio pid=0x1020,0x2202
>
>
> Regards,
> Clemens
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed May 1 12:15:02 2013