Re: [LAU] Trouble getting Tascam US-122 to run

From: Rui Nuno Capela <rncbc@email-addr-hidden>
Date: Fri May 24 2013 - 17:52:25 EEST

On 05/19/2013 03:58 AM, Rusty Perez wrote:
> Hi folks,
> for everyone but Julien, I'm the owner of the system in question.
> It may be useful to note that this is the original us122, NOT the us122mkII.
> Julien has updated some system settings, I have rebooted, unplugged
> and replugged the interface, but no joy.
> I have also made sure that the interface does respond when plugged in
> to my windows machine, so I'm reasonably sure it works as it should.
> Thanks!
> Rusty
>
>

ouch!

i'm a (not so happy anymore) owner of a us224 which does all the same
path as your us122,,.

i am sloppy and the systems i use this lovely piece of h/w is not what
you'd call the latest and greatest

so (my) the state of things at the time of this writing, is the following:

- on 3.4.x-rt it still works but only like a plain usb1 device (-r48000
-p128 -n3); good old and awesome, special fast and low-latency
rawusb/hwdep mode of operation is dead. or it seems so

- on 3.8.x-rt it doesn't work at all; always nagging the device's being
used by something else (and no, it's not pulseaudio:); and if you dare
to use jack1 then, well, it just crashes the whole show (kernel oops)

only tested with preempt_rt though (thus the -rt suffix above)...

i know this does not help in anything but at least you're not alone :)

cheers

-- 
rncbc aka Rui Nuno Capela
rncbc@email-addr-hidden
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri May 24 20:15:01 2013

This archive was generated by hypermail 2.1.8 : Fri May 24 2013 - 20:15:02 EEST