On 06/29/2013 11:57 PM, Patrick Shirkey wrote:
>
>
> According to this thread it's an ARM specific debug method.
>
> http://www.spinics.net/lists/arm-kernel/msg19006.html
>
> Someone here might be able to help if you pastebin the revised patch
>
Thanks. Thought so too so it might be relatively easy to fix.
> When does the CPU load from the wifi devices start to spike?
>
> When you enable the wifi driver
> After you ifup the NIC
> While you have a remote connection
>
Have to check, iirc as soon as I enable it.
> Did you test the bandwidth to confirm that the config dwc_otg.speed=1 was
> reducing the throughput to 12Mb/s
>
No I didn't, I'll check this too.
> Did you also try: dwc_otg.fiq_fix_enable=0/1
>
The dwc_otg driver in the RK3066 kernel source doesn't have this parameter.
> I think it is early days yet. It took a couple of years to get the maudio
> quattro USB to play nice. It turned out it was using LE on the output and
> BE on the input.
>
> Just for reference sake, if you try it with just -P enabled does it
> perform any better?
>
Will do. I'll report back with the results.
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Jul 1 00:15:04 2013
This archive was generated by hypermail 2.1.8 : Mon Jul 01 2013 - 00:15:04 EEST