Re: [LAU] Audio interface MIDI ports just showing on advanced mode

From: Carlos sanchiavedraz <csanchezgs@email-addr-hidden>
Date: Thu Aug 22 2013 - 16:36:49 EEST

2013/8/18 Clemens Ladisch <clemens@email-addr-hidden>

> Carlos sanchiavedraz wrote:
> > The MIDI port on my UA25EX just shows up when audio card is in advanced
> > driver mode
>
> In Windows, the advanced mode is intended to be used with the Roland
> drivers; disabling it should be necessary only when you're using it with
> a system where these drivers are not installed. Due to bugs in the
> built-in Windows USB MIDI driver, MIDI is made available only in
> advanced mode.
>
> In theory, Linux should support advanced mode.
>

It is supported; the problem is that for the moment Jack doesn't start in
this mode. There are some issues in RPi related to Jack, using USB 1 or USB
2 and the advance mode.

> > which by now is not the main mode I'm playing because of problems with
> > this mode on Raspberry PI (for the moment It runs with jack1 and it
> > won't start in advanced mode).
>
> Which kernel are you using? To other programs (i.e., aplay/arecord)
> work?
>

Kernel is Raspberry 's, it seems Linux 3.6.11:

https://github.com/raspberrypi/linux

>
> > I suppose that with Jack2 this won't be a problem
>
> If this is a driver problem, Jack2 will not work either.
>
>
> Regards,
> Clemens
>

Yes, you're right, is not about the driver. I meant what I mentioned before
about Jack problems with RPi.

Thanks, Clemens.

-- 
Carlos sanchiavedraz
* Musix GNU+Linux
  http://www.musix.es

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Aug 23 04:15:02 2013

This archive was generated by hypermail 2.1.8 : Fri Aug 23 2013 - 04:15:02 EEST