Re: [LAU] Jack X-run

I forgot I changed priority to 1 (that was stupid but I didn't noticed) , I
changed periods from 3 to 2 too, both trying to resolve this xrun problem
hehehe. I returned priority to default and periods to 3 and tested, still
xrun and tried with priority 80, same thing... I'm using my onboard
soundcard hw:0,0 , do you guys have any idea?

jackdrc:
/usr/bin/jackd -dalsa -r48000 -p128 -n3 -D -Chw:0 -Phw:0,0

2014-05-14 16:00 GMT-03:00 Federico Galland <federicogalland@email-addr-hidden>:

> Are you using your onboard soundcard (hw:0,0)?
>
> If it's an intel hda card, you should also use 3 periods instead of 2. At
> least on all my hda-intel systems, using 3 periods lets me go below 128
> f/p, while using 2 would throw a lot of xruns.
>
> Also, as Jeremy pointed out, you should be rising your priority to at
> least 70 or more.
>
> Good luck!
>
>
>
> --
> Federico Galland <federicogalland@email-addr-hidden>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>

-- 
Lucas Conejero Takejame
Engenharia Elétrica - ênfase em computação
Escola Politécnica - USP

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu May 15 00:15:03 2014