Re: [LAU] Record from M-Audio 2496 S/PDIF input

From: Ivan K <ivan_521521@email-addr-hidden>
Date: Sat Aug 02 2014 - 05:27:35 EEST

Len Ovens <len@email-addr-hidden> writes:

> The s/pdif inputs are 9 and 10 normally (on the ice1712).

Damn good information to have. Where is that sort
of information documented?

> Audacity will 
> only record those if you record 10 tracks at a time. [...]
  
> Or you can start Jackd first and then set audacity to talk to
> jack instead of alsa or pulse. You can use qjackctl to connect
> audacity to channel 9 for recording. To see levels hit pause
> and record... infact you will have to do this before you
> connect ports with qjackctl.

This seems most promising to me.

  I have audacity started up and in "pause/record mode".
  I have qjackctl started up.  

But I don't really know where to go from here. I have
hit the qjackctl "Connect" button, and see both the
"Audio" and "Alsa" tab. Perhaps you direct me where to
go next or direct me to some documentation?

Thank you for your pointers!
  
> This is why I would use pulse bridged to jackd so I can
> connect pulse to the right ports ahead of time. Then if
> audacity is using pulse it will "just work" (for me anyway).
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sat Aug 2 08:15:01 2014

This archive was generated by hypermail 2.1.8 : Sat Aug 02 2014 - 08:15:02 EEST