Thanks to everyone whom responded.
Len Ovens <len@email-addr-hidden> writes:
>
> Audacity uses the portaudio library to connect to Jackd.. so in the
> qjackctl connections window and the audio tab you should see PortAudio on
> the right side.
and
"David Jones" <gnome@email-addr-hidden> writes:
>
> My experience with recording via Audacity using JACK is that the
> PortAudio connection only appears in JACK while Audacity is actually
> using it (playing or recording). So I guess you start recording in
> Audacity, pause it, tweak the connections in JACK, then continue recording.
Well, no matter if Audacity is recording or playing,
all I see in qjackctl, [Connect], "Audio" tab is:
== == Readable Clients/
== == Output Ports
== == - system
== == capture_1
== == capture_2
on the right, and then on the left, I see:
== == Writable Clients/
== == Input Ports
== == - system
== == playback_1
== == playback_2
== == playback_3
== == playback_4
== == playback_5
== == playback_6
== == playback_7
== == playback_8
I see don't see a mention of audacity or portaudio.
Also, does "system" refer to my M-Audio card or
the integrated audio on the motherboard?
If system does refer to my M-Audio card, I don't
see anything in the under Readable Clients/Output Ports
that distinguishes between the s/pdif input and the
ADC input.
On the other hand, when I run mhWaveEdit, as suggested by
Mr. Ovens, I do see the word "mhwe" listed both in
the Readable Clients/Output Ports and Writable Clients/Input Ports.
At this point, I can continue to work with mhWaveEdit
as audacity appears to be problematic.
---- So running mhWaveEdit, I still cannot create any audio files with actual sound, or see mhWaveEdit's VU meters show any volume. So, does "system" in the connect window of qjackctl refer to my M-Audio card? Thank you for your suggestions! _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Sun Aug 3 00:15:02 2014
This archive was generated by hypermail 2.1.8 : Sun Aug 03 2014 - 00:15:03 EEST