Re: [LAU] Roland Integra-7 and Alsa 1.0.28

From: Harry van Haaren <harryhaaren@email-addr-hidden>
Date: Sun Dec 07 2014 - 23:30:01 EET

On Sun, Dec 7, 2014 at 9:23 PM, Mirko Horstmann <bb@email-addr-hidden> wrote:

> Hi,
>
> I just remembered this post from the alsa-devel list from last year that
> said several Yamaha and Roland devices may work through a patch (which I
> believe should have found it's way into Alsa 1.0.28):
>
> http://mailman.alsa-project.org/pipermail/alsa-devel/2013-June/063475.html
>
> I thought I'd give it a try: I own a Roland Integra-7 sound module which
> is supposed to be able to send it's output over USB. I cannot get it to
> output any sound, though. Here's what I'm trying to do (USB mode is set to
> "Vendor (Audio + MIDI)" on the device):
>
> mir@email-addr-hidden:~$ arecord -l
> **** List of CAPTURE Hardware Devices ****
> card 0: PCH [HDA Intel PCH], device 0: ALC272 Analog [ALC272 Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 1: INTEGRA7 [INTEGRA-7], device 0: USB Audio [USB Audio]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
>
> mir@email-addr-hidden:~$ arecord -d 10 -c 2 -f S32_LE -r44100 -D hw:INTEGRA7
> test.wav
> Recording WAVE 'test.wav' : Signed 32 bit Little Endian, Rate 44100 Hz,
> Stereo
> arecord: pcm_read:2031: read error: Input/output error
>
>
> With different settings, arecord tells me that S32_LE and 44100 are the
> only available format and rate. The "Recording WAVE..." message appears
> instantly, the error message appears after the 10 seconds. The wave file
> then exists with a header but no audio content.
>
> Is there anything I'm doing wrong, or did I misinterpret the post on
> alsa-devel and a quirk is still needed for the Integra?
>
I think the quirk is there to tell the kernel module that it can handle the
vendor/product IDs.. so if its listed by arecord -l then that's OK.

The following post (by Clemens) lists hardware capabilities, after
compilation:
http://www.spinics.net/linux/fedora/alsa-user/msg07230.html

Would you post the output of the program in the email thread that I linked?
Perhaps there's an ALSA format issue or so.

HTH, Cheers, -Harry

PS: Anybody have a one-liner command that lists ALSA hardware capabilities
(not current status)?

-- 
http://www.openavproductions.com

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Dec 8 00:15:02 2014

This archive was generated by hypermail 2.1.8 : Mon Dec 08 2014 - 00:15:02 EET