On Thu, Dec 11, 2014 at 3:49 PM, francois juigner <
francois.juigner@email-addr-hidden> wrote:
>
> 1 - is it compulsory to use hdsploader, even if the card is recognized ?
>
HdspLoader and HdspMixer are two programs that will intereact with the RME
devices: the first provides the firmware it needs to run, the second
interacts with the device just like amixer, only provides a sane GUI :D
Basically, since the RME has a routing matrix built-in, using amixer will
provide every single control, which will be a totally horrible way to work.
Since HdspMixer provides a good way to interact with the sub-mixes, its
advised ;)
HTH, -Harry
PS: I have a Multiface 2, so my experience might be slightly different to
yours with the AIO.
-- http://www.openavproductions.com
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu Dec 11 20:15:02 2014
This archive was generated by hypermail 2.1.8 : Thu Dec 11 2014 - 20:15:02 EET