On Tue, 03 Mar 2015 10:34:33 +0100, sub wrote:
>Alsa and jack are not the same, please i am looking for support on a
>specifical problem.
On Thu, 26 Feb 2015 17:18:35 +0100, sub wrote:
>When i record multitrack audio using Ardour and jackd
So I'm aware that you aren't using the ALSA backend for your firewire
device ;) ...
>On 03/03/2015 10:22 AM, Ralf Mardorf wrote:
>>> On 03/03/2015 01:03 AM, Chris Caudle wrote:
>>>> for nearly every device the driver should be able to set the
>>>> sample rate
>>
>> But by what way can the sample rate be set?
>>
>> I've got PCI cards were jackd is able to set all available sample
>> rates, but for my PCIe card just some sample rates can directly be
>> set by jackd, for some sample rates I need to do it by alsamixer,
>> before I start jackd.
... but perhaps there's something else that needs to be used to set the
sample rate, before you can start jackd. I don't know, but since nobody
is able to give you the correct answer, brainstorming might be helpful.
I only wanted to point out that jackd not always can be used to set the
hardware's sample rate.
Regards,
Ralf
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Mar 3 12:15:02 2015
This archive was generated by hypermail 2.1.8 : Tue Mar 03 2015 - 12:15:02 EET