On Sun, 14 Feb 2016 20:13:31 +0100
fred <f.rech@email-addr-hidden> wrote:
> > On Sat, 13 Feb 2016 16:01:57 -0500
> >
> >
> > % ./rtirq status
> >
> > PID CLS RTPRIO NI PRI %CPU STAT COMMAND
> > 87 FF 90 - 130 0.0 S irq/8-rtc0
> > 547 FF 90 - 130 1.2 S irq/18-snd_ice1
> >
> >
>
> your soundcard is supposed to be RTPRIO 80
Not sure about this.
As it is mentioned in:
http://wiki.linuxaudio.org/wiki/system_configuration
"so choose a sensible priority value for Jack1 (70 for example,
this will assign prio 80 to Jack1's watchdog thread), bearing
in mind also that sound devices might get a priority in the
80-90 range if you use rtirq. Jack2 doesn't have a watchdog
thread (neither does the current git version of Jack1) so you
can give Jack2 an even higher prio."
The system runs jackd2, so it can use a higher priority.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Feb 15 00:15:02 2016
This archive was generated by hypermail 2.1.8 : Mon Feb 15 2016 - 00:15:02 EET