On Thu, 5 May 2016 15:38:46 +0000, Fons Adriaensen wrote:
>On Thu, May 05, 2016 at 01:32:01PM +0200, Jörn Nettingsmeier wrote:
>> If I have understood the previous posts correctly, a tilt EQ is even
>> simpler than two shelves: just use a single one at the desired tilt
>> frequency and adjust the overall gain, like Fons mentioned:
>
>The advantage of using two shelf filters would be that you can have
>some control over the slope of the transition region.
More likely you completely lose control, because the "Tilt EQ"
provides special features, e.g.
http://www.audiopluginsforfree.com/tal-use/ provides an extra-knob for
the "bass lift filter". "12 dB bass lift filter at 300 Hz" at what
quality? +12dB for exactly 300Hz, +-0dB for everything lower and higher?
Is the "Q" in EQ for "quiz"?
Regards,
Ralf
PS:
On Thu, 5 May 2016 17:32:28 +0200, Ralf Mardorf wrote:
>The ear is as much a tactile organ as fingertips are, just
>the interpretation of the tactile interpretation by the ear is tricky.
^^^^^^^^^^^^^^ should read
"experience"
>However, especially when it's about measurements, I would be careful
>with EQing.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu May 5 20:15:02 2016
This archive was generated by hypermail 2.1.8 : Thu May 05 2016 - 20:15:02 EEST