Le 03/06/2016 11:43, Yassin Philip a écrit :
>
> [...] I think existing episodes will stay "as is" :( but I want to get
> it right for the next ones. I'm going to try input => compressor
> =>deesser => reverb ; but about that " lowpass shelve filter with a
> cutoff around 150 - 200 Hz" business, is there a way to insert such a
> processing inside my realtime effect chain (Calf Only, ATM) ? If I
> follow you, this would be a Calf Eq 5 bands, with every band off
> except for the far left "low shelf", dragged at 160Hz, and pushed down
> a bit, right? Now should I (gererally) put it in front of the
> compressor, or after?
>
A "classic" chain will be mic>preamp>soundcard>Jack>DAW in>compressor>eq
As suggested early by Roger, you may want to use de-esser as explained here
https://en.wikipedia.org/wiki/De-essing
but the tip on mic position is the one to follow (when you cook, if
ingredients are bad the meal will be bad..)
HTH;
-- Fred, _______________________________________________ Linux-audio-user mailing list Linux-audio-user@lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Fri Jun 3 20:15:02 2016
This archive was generated by hypermail 2.1.8 : Fri Jun 03 2016 - 20:15:02 EEST