Re: [LAU] speaker frequency response measurement and display

From: james <james@email-addr-hidden>
Date: Fri Jun 24 2016 - 18:06:54 EEST

On 24/06/2016 14:38, Chris Caudle wrote:
> On Fri, June 24, 2016 6:33 am, Michael Jarosch wrote:
>> >As long as I know, the tools you mentioned are not made for my purposes
>> >as the room is explicitly included in the measurement, because in the
>> >end speaker AND room is what to be linearized, frequency wise. I need
>> >something different: The speaker itself, in the best case without the
>> >influence of a room surrounded.
> The traditional way of doing that is by measuring outdoors in a field.
> You still get a reflection from the ground even if there are no trees or
> fences nearby, so you either try to minimize that by placing the
> microphone very close to the ground, or place both speaker and microphone
> on a stand a meter or two tall so that the ground reflection is attenuated
> a little.
>
> -- Chris Caudle
Or you can put the speaker on (or in) the ground pointing up, and
suspend the microphone.

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Jun 24 20:15:03 2016

This archive was generated by hypermail 2.1.8 : Fri Jun 24 2016 - 20:15:03 EEST