Re: [LAU] Focusrite Scarlett 8i6 recognised, inputs work, but no output - Mint 18

Hi,

thanks for sharing your issue. It is a weird problem, some are affected,
others are not.

See also this thread at the ardour forum:
https://community.ardour.org/node/5751?page=1

there's one person who uses it fine with Fedora 22, but others on avlinux
and UbuntuStudio who have the same playback problem I have.

And on my Mint 17 I have never ever had a single issue.

There's also an old patch here, but I read that it was implemented in the
kernel (kernel.org grabs the ALSA git since a while).
http://sergey.vlasov.me/2012/09/using-focusrite-scarlett-18i6-in-linux.html

would be great if someone could shed some light :)

thanks!
M

--
Marco Donnarumma, Ph.D
*Performing bodies, sound and machines**Universität der Künste Berlin*
http://marcodonnarumma.com
4w33534643646
--
On Tue, Aug 9, 2016 at 5:55 PM, <ycollette.nospam@email-addr-hidden> wrote:
> I have met the same problem with the Scarlett 18i8.
> Some times, I have inputs and outputs level. But some time, the input is
> ok but no outputs. If I restart the Scarlett soundcard (I turn off the
> power) then, most of the time, the output level is back.
> Some times, the level seems to be a little bit low, but the balance is not
> OK (everything is on the left or on the right). After a restart, everything
> is back.
> 2 times out of 3, the sound card works fine.
> I use Fedora 24 with a RT kernel from CCRMA.
>
> ----- Mail original -----
> De: "Marco Donnarumma" <lists@email-addr-hidden>
> À: "linux-audio-user" <linux-audio-user@email-addr-hidden>
> Envoyé: Mardi 9 Août 2016 17:48:48
> Objet: [LAU] Focusrite Scarlett 8i6 recognised, inputs work,    but no
> output - Mint 18
>
>
>
>
>
>
>
>
>
>
> Dear all,
>
> I have been using my Focusrite Scarlett 8i6 for a couple of years without
> issues on a Linux Mint 17 laptop. I can use the sound card only via
> Qjackctl (no ALSA out of the box).
>
> Now, I have a new computer (shuttle xpc slim) on which I installed Linux
> Mint 18.
> The sound card is recognised by both Jack and cat /proc/asound/cards.
> It even correctly appears in the system sound preferences, which did not
> happen in Mint 17.
>
> However, while the inputs work, there's no output. I've tested with a
> bunch of audio software, such as Pd, Ardour, Hydrogen, etc..
>
>
> Interestingly, if, immediately after testing with Mint 18, I plug the
> sound card back to my Mint 17 laptop, at first, the sound card does not
> produce output. I have to power off the sound card and re-plug it, then it
> works.
>
>
>
> I would need this to work only with Jack, I'm not looking for an ALSA fix.
>
>
> I know in the past three years there has been a few ALSA patches to make
> this range of Focusrite work, and I think most of those patches are now in
> the mainline kernel. Although I'm not familiar with this.
>
>
>
>
>
>
> Does anything I could try come to mind?
>
>
>
>
>
>
>
>
> [SYSTEM INFO]
> Mint 18
> kernel: 4.4.0-31-lowlatency
>
> alsa-base 1.0.25
>
> libasound, etc.. 1.1.0
>
>
>
>
> thanks in advance!
>
> best wishes,
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --
> Marco Donnarumma, Ph.D
>
> Performing bodies, sound and machines
> Universität der Künste Berlin
> http://marcodonnarumma.com
>
>
>
>
>
> 4w33534643646
> --
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Aug 9 20:15:03 2016