Re: [LAU] Feedback Cancellation Plugin

The wavelength of a 10kHz sound is 3.4cm, which means that, assuming a
single point source (monitor or PA) and single point mic, you go from a
full positive feedback (perfectly in phase) to full negative feedback
(perfect counter-phase) at that particular frequency simply by changing the
distance between them by 1.7cm. Things get awfully more complicated with
multiple sources, non-puntiform sources/mics, reverberant room, mic
directional patterns, etc., and of course each frequency will dictate its
own phase relationship. And then there's sound processing introducing phase
shifting…
It's just impossible - in a real world situation - to calculate the exact
mic placement that reduces the feedback, it's a lot more practical to use
some good sense (closest to the instrument as possible, low-sensitivity
direction pointed as much as possible toward the closest monitor) and then
move around the mic until you find a good spot - if there is one at all.
(And of course it's misguided to think - in this context - that there is a
"right" and "wrong" wire phase for speakers and mics.)
Once you placed your mics with some sense, the solution to the feedback
problem must necessarily be reactive, not proactive: you hear the feedback,
you lower the gain - possibly just at that frequency with a notch filter;
where "you" could be a human or a piece of hardware or software.

-- Emanuele Rusconi

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Oct 24 16:15:01 2016