Re: [LAU] using Jack an interface to ecasound

From: Ralf Mardorf <ralf.mardorf@email-addr-hidden-dsl.net>
Date: Tue Jan 17 2017 - 17:22:34 EET

Hi,

> On 17 Jan 2017, at 10:23, Jeanette C. <julien@email-addr-hidden-paderborn.de> wrote:
> Jan 17 2017, john gibby has written:
>>> When qjackctl brings up the jack server, the buffer size gets overridden to 1024
> it appears that your soundcard is the problem.

wait a minute ....

assuming jack should already run, when starting qjackctl, nothing should change.

If you use QjackCtl to start jack, then take a look at the settings dialog provided by QjackCtl. Set up the wanted frames value, then stop jack and after that start it again. QjackCtl provides buttons to stop and start it.

Mention what version of QjackCtl you are using, unfortunately the GUI was redesigned.
Also take a look at the settings, does it start jackd or jackdbus?

What version of Jack are you using?

I suspect that it's not an issue with the audio interface, but a user error.

Regards,
Ralf
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Jan 17 20:15:02 2017

This archive was generated by hypermail 2.1.8 : Tue Jan 17 2017 - 20:15:02 EET