Could be but the device remembers the sample rate and everything else
between bootups and the display is showing 48k before I hit start in
cadence (or qjackctl) so from my point of view, sample rate change does not
occur..
I don't think waiting before launching jack helps but I can try that and
see if it helps.
/Anders
On Aug 8, 2017 9:33 PM, "Paul Davis" <paul@email-addr-hidden> wrote:
> That seems to be a function of the device taking a noticeably long time to
> switch sample rates and be "ready for action". If JACK changes the device
> state as a part of the startup, it takes a while before it is actually
> ready.
>
> On Tue, Aug 8, 2017 at 2:57 PM, Anders Hellquist <lau@email-addr-hidden>
> wrote:
>
>> Ok, the only quirk with my setup that others have experienced too
>> according to Ardour forum threads is that I often need two to four attempts
>> to start jackd (actually using cadence in kxstudio to starti jackd) but
>> when successfully started, it has never failed.
>> Sometimes it starts on first attempt and sometimes I need more than 5 but
>> usually on second or third.
>>
>> I hope you can figure out whats causing the unreliable behaviour on your
>> end.
>>
>> /Anders
>>
>> 2017-08-08 20:18 GMT+02:00 Paul Davis <paul@email-addr-hidden>:
>>
>>> I got mine to work (kernel 4.9) but it seems a little unreliable and may
>>> have needed to be used on a MacOS box first. Still trying to figure out
>>> what causes the lack of signal at the CPU. Certainly not caused by config
>>> changes on the MOTU itself.
>>>
>>> On Tue, Aug 8, 2017 at 1:27 PM, Anders Hellquist <lau@email-addr-hidden>
>>> wrote:
>>>
>>>> Hi again and sorry for the delay
>>>>
>>>> uname -a
>>>>
>>>> Linux 3.13.0-126-lowlatency #175-Ubuntu SMP PREEMPT Thu Jul 20 19:13:12
>>>> UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
>>>>
>>>>
>>>>
>>>> cat /proc/asound/version
>>>>
>>>> Advanced Linux Sound Architecture Driver Version k3.13.0-126-lowlatency.
>>>>
>>>>
>>>> /Anders
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Linux-audio-user mailing list
>>>> Linux-audio-user@email-addr-hidden
>>>> https://lists.linuxaudio.org/listinfo/linux-audio-user
>>>>
>>>>
>>>
>>
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Aug 9 00:15:02 2017
This archive was generated by hypermail 2.1.8 : Wed Aug 09 2017 - 00:15:02 EEST