Re: [LAU] ffado and new PC

Ok, so even though the newer VIA chipset is said to have fixed the older
issues...
I happened to have a card with TI chipset, so I plugged it in place of the
via card.

Worked right out of the box.

Both alsa and jack see the 12 inputs/outputs of the AF12.

ffado mixer see the af12, as does ffado-diag. But ffado-diag still
complains about missing modules...

On Wed, Oct 18, 2017 at 3:07 AM, Michael Jarosch <riotsound@email-addr-hidden>
wrote:

> Am Dienstag, den 17.10.2017, 17:29 +0000 schrieb holger@email-addr-hidden:
> >
> > > FFADO diagnostic utility 2.2.1
> > > ============================
> > > […]
> > > Host controllers:
> > > 05:05.3 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc.
> > > VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev
> > > 80) (prog-if 10 [OHCI])
> > > Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394
> > > OHCI Controller [1106:3044]
>
> Did you use this chipset with your old computers, too? Don't know, if
> this one is good enough for (realtime-)audio.
>
> Sounds stupid, but it worked for me: If you have more than one firewire
> port on the firewire card, try them all, one after another!
>
> Greets!
> Mitsch
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> https://lists.linuxaudio.org/listinfo/linux-audio-user
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Oct 18 20:15:02 2017