[LAU] anyone running 4.13.15-300.rt5.1.fc27.ccrma.x86_64+rt + snd_usb yet?

Anyone running the 4.13.15-300.rt5.1.fc27.ccrma.x86_64+rt from the
PlanetCCRMA repository with a USB audio interface? I find that my USB
interface makes output so distorted it is not recognizable with that RT
kernel, but works OK with the stock fedora kernel. I find no error
messages in /var/log/messages or dmesg when playing audio.

I tried aplay, but no error messages at all.

I thought perhaps jackd would give useful error messages, but I see no
errors when starting, but "no callback" messages begin showing up right
away. I'm stopped at the moment, I do not know how to proceed without
finding some kind of error message to point me in the right direction. Is
there any other location to find status information on USB audio devices?

This is the rtirq configuration in use:
RTIRQ_NAME_LIST="usb enp3s4f1 i8042"
RTIRQ_PRIO_HIGH=95
RTIRQ_PRIO_DECR=2

Is "usb" enough there, or should it be snd_usb in place of usb?

As an aside, I found that the IRQ priorities were not set automatically, I
had to manually run rtirq, but that is probably a fedora package problem.
Getting USB interrupt priority set to a high priority made no difference

This is the startup output from jackd:
Acquire audio card Audio1
creating alsa driver ...
hw:Lambda|hw:Lambda|1024|3|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 3 periods
ALSA: final selected sample format for capture: 24bit little-endian
ALSA: use 3 periods for capture
ALSA: final selected sample format for playback: 24bit little-endian
ALSA: use 3 periods for playback
Jack: JackSocketServerChannel::Open
Jack: JackServerSocket::Bind : addr.sun_path /dev/shm/jack_default_1000_0
Jack: JackSocketServerChannel::BuildPoolTable size = 1
Jack: JackEngine::Open
Jack: JackClientSocket::Connect : addr.sun_path /dev/shm/jack_default_1000_0
Jack: JackEngine::ClientInternalOpen: name = freewheel
Jack: JackEngine::AllocateRefNum ref = 1
Jack: JackPosixSemaphore::Allocate name = jack_sem.1000_default_freewheel
val = 0
Jack: JackEngine::NotifyAddClient: name = freewheel
Jack: JackDriver::ClientNotify ref = 1 driver = system name = freewheel
notify = 0
Jack: JackDriver::ClientNotify ref = 0 driver = freewheel name = system
notify = 0
Jack: JackConnectionManager::DirectConnect first: ref1 = 1 ref2 = 1
Jack: JackGraphManager::ConnectRefNum cur_index = 0 ref1 = 1 ref2 = 1
Jack: JackDriver::SetupDriverSync driver sem in flush mode
Jack: JackGraphManager::SetBufferSize size = 1024
Jack: JackAlsaDriver::Attach fBufferSize 1024 fSampleRate 48000
Using port names patch v0.1 (07.04.2010)
Trying to load portnames from /home/chris/.config/jack/cards/Lexicon
Lambda.ss.ports.in
Trying to load portnames from /home/chris/.config/jack/cards/Lexicon
Lambda.ports.in
Trying to load portnames from /etc/jack/cards/Lexicon Lambda.ss.ports.in
Trying to load portnames from /etc/jack/cards/Lexicon Lambda.ports.in
Trying to load portnames from /home/chris/.config/jack/cards/Lexicon
Lambda.ss.ports.out
Trying to load portnames from /home/chris/.config/jack/cards/Lexicon
Lambda.ports.out
Trying to load portnames from /etc/jack/cards/Lexicon Lambda.ss.ports.out
Trying to load portnames from /etc/jack/cards/Lexicon Lambda.ports.out
Jack: JackEngine::PortRegister ref = 0 name = system:capture_1 type = 32
bit float mono audio flags = 22 buffer_size = 1024
Jack: JackGraphManager::AllocatePortAux port_index = 1 name =
system:capture_1 type = 32 bit float mono audio
Jack: JackConnectionManager::AddOutputPort ref = 0 port = 1
Jack: JackEngine::ClientNotify: no callback for notification = 9
Jack: JackEngine::ClientNotify: no callback for notification = 9
Jack: JackAlsaDriver::Attach fCapturePortList[i] 1
Jack: JackEngine::PortRegister ref = 0 name = system:capture_2 type = 32
bit float mono audio flags = 22 buffer_size = 1024
Jack: JackGraphManager::AllocatePortAux port_index = 2 name =
system:capture_2 type = 32 bit float mono audio
Jack: JackConnectionManager::AddOutputPort ref = 0 port = 2
Jack: JackEngine::ClientNotify: no callback for notification = 9
Jack: JackEngine::ClientNotify: no callback for notification = 9
Jack: JackAlsaDriver::Attach fCapturePortList[i] 2
Jack: JackEngine::PortRegister ref = 0 name = system:playback_1 type = 32
bit float mono audio flags = 21 buffer_size = 1024
Jack: JackGraphManager::AllocatePortAux port_index = 3 name =
system:playback_1 type = 32 bit float mono audio
Jack: JackConnectionManager::AddInputPort ref = 0 port = 3
Jack: JackEngine::ClientNotify: no callback for notification = 9
Jack: JackEngine::ClientNotify: no callback for notification = 9

-- 
Chris Caudle
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
https://lists.linuxaudio.org/listinfo/linux-audio-user