[LAU] drivers to use for Motu1248 on TB3

From: Andreas WERNER <wernand@email-addr-hidden>
Date: Sun Jan 21 2018 - 21:43:09 EET

"lspci -vvv" shows this audio controller:

Multimedia audio controller: Mark of the Unicorn Inc Device 0008
        Subsystem: Mark of the Unicorn Inc Device 0008
        Physical Slot: 1-3
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at 92b00000 (64-bit, non-prefetchable) [disabled]
[size=4K]
        Region 2: Memory at 92b01000 (64-bit, non-prefetchable) [disabled]
[size=4K]
        [virtual] Expansion ROM at 92a00000 [disabled] [size=1M]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000 Data: 0000
        Capabilities: [58] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s
unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
        Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00

"lspci -nn" is "Subsystem: Mark of the Unicorn Inc Device [137a:0008]"

boltctl also recognizes the unit.

The audio device MOTU 1248 is attached/connected by cable by Thunderbolt 3
on a iMac 18.2 2017 running Fedora 27 x86_64 Gnome 3.26.2 (runs perfectly on
a iMac 2017 Retina 21,5).

Which kernel drivers and modules are needed/available to use this device as
an audio device?

How to have this audio device listed in PulseAudio?

Please advice. Thks.

Rgds
AW
 

--
Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
https://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Jan 22 00:15:01 2018

This archive was generated by hypermail 2.1.8 : Mon Jan 22 2018 - 00:15:01 EET